Vcds Coding Audi Psawelift Audi a5 s5 rs5 (b9) ***official*** b9 a5 s5 rs5 obdeleven coding thread (updated 8 6 2018) with the help of iampraneel and a bit of digging, i'm putting together a list of obdeleven coding changes that is possible for the b9 platform into one document. A4 (b9 platform) discussion a4b9 vcds coding guidance please i have been working through b9 coding lists from older threads with mixed success. i have managed needle sweep, disable seatbelt chime, activate drl menu in mmi, and start stop via ac. had a play around with a few others.
Vcds Coding Audi Psawelift With long coding helper. the long coding helper file is installed in the same location as the vcds software, c:\ross tech\vcds in most cases. look for the "lcode.exe" file. open up long coding helper, and on line 1), type in " " and the coding value. long coding helper will show you the binary values that add up to the sum total you type in. Ross tech is not responsible for any damage or problems that may result from following these instructions. they are to be used at your own risk. these instructions apply to the audi a4 s4 a5 s5 (8k 8t). similar models include the audi 2008 q5 (8r fp). it is always recommended to perform a complete auto scan and save it prior to coding changes. Verified vcds user. i just updated from a 2012 audi a7 (c7) to a 2019 audi a7 (c8) and i am looking for adaptations and coding for the items listed below. 1. needle sweep in virtual cockpit. 2. display transmission gear for "d" and "s" drive modes. 3. change the parking assist shutdown speed threshold. 4. Instructions to download, install and get started here: ross tech: vcds: downloads: current release and manual. 2) connect your hex v2 or hex net adapter to your computers usb port. (no car connection required) 3) start the vcds software, select options and then select the usb interface and click test.
Comments are closed.