Scaffolding Safety Tips Hsse World Lap the planking by a minimum of 12 inches (0.3 m). secure the planking properly to prevent displacement and sideways movement. scaffold platforms and walkways must measure at least 18 inches (0.46 m) wide. provide overhead protection for employees working on scaffolds who are exposed to falling objects. Photo of the day: flagman and traffic control. photo of the day: managing risks of exposure to solvents in the workplace. photo of the day: scissor lift safety. photo of the day: hse bulletin board. photo of the day: arc fault circuit interrupters (afci) photo of the day: safe use of ladders and step ladders.
Scaffolding Safety Tips Hsse World Video: supported scaffolding safety. 11 min read. 3 years ago khaled ismail. every day, millions of people reach the work they do by using supported scaffolds which provide a walking and working surface up off the ground. however, scaffolds can also be hazardous and thousands of workers are injured every year and more than 50 are killed. The following scaffolding safety tips will help reduce the risks of an accident when working at heights. 1. use proper safety equipment. personal protective equipment (ppe) is necessary when working in any industrial or construction setting, especially at height. wearing a hard hat on scaffolds is crucial to protect against injuries from. Always check inspection tags. know the weight capacity of the scaffold. have a handhold above the scaffold platform. level the scaffold after each move. do not extend adjusting leg screws more than 12 inches. use your safety belts and lanyards when working on scaffolding at a height of 10 feet or more above ground level. Scaffolding safety tip #3 build a stable base and monitor the load. one of the inherent dangers of scaffold is that the surfaces scaffold is used on and for is often uneven and can even be soft (sand etc.). scaffold frames are designed for use with casters or base plates, so make sure you have a stable base using these items.
Scaffolding Safety Tips Hsse World Always check inspection tags. know the weight capacity of the scaffold. have a handhold above the scaffold platform. level the scaffold after each move. do not extend adjusting leg screws more than 12 inches. use your safety belts and lanyards when working on scaffolding at a height of 10 feet or more above ground level. Scaffolding safety tip #3 build a stable base and monitor the load. one of the inherent dangers of scaffold is that the surfaces scaffold is used on and for is often uneven and can even be soft (sand etc.). scaffold frames are designed for use with casters or base plates, so make sure you have a stable base using these items. General safety precautions for scaffolding: 1. a competent third party certified person is allowed for scaffolding job: 2. cold work permit is required: 2. employees shall be used chin straps, leather gloves, and safety harness full time: 3. tools and spanners shall be secured with the body:. In fact, #scaffolding related accidents account for a #scaffolding safety tips working at height can be dangerous if the proper precautions aren’t taken. hsse world #scaffolding safety tips working at height.
Comments are closed.