Nissan Quest Coolant Flush Start your coolant flush by draining the coolant antifreeze that is in your reservoir, then drain the coolant that is in your radiator by opening the petcock or removing the lower radiator hose. this video shows where the radiator drain plug (petcock) is located on a 2011 nissan quest. fill up the radiator with distilled water and run the engine. Start your coolant flush by draining the coolant antifreeze that is in your reservoir, then drain the coolant that is in your radiator by opening the petcock or removing the lower radiator hose. this video shows where the radiator drain plug (petcock) is located on a 2001 nissan quest. fill up the radiator with distilled water and run the engine.
Coolant Flush How To Nissan Quest 2004 2009 2006 Nissan Quest S Open radiator cap and rear air relief valve at rear center of engine. 3. remove radiator overflow reservoir, drain and clean with distilled water, reinstall. 4. drain coolant using drain plug at bottom of radiator. 5. pre mix 1 gallon genuine nissan coolant 1 gallon distilled water using a suitable container. 6. The most important bit is not to mix different types of coolant (ie the whole oat hoat xxx discussion). the coolant i drained was the same 'dark green murk' as the nissan oem i boughtt so i was pretty confident i had the right stuff. yeah my $15 came from the canadian peso effect, probably only $10usd difference between prestone and oem. 90,000 mile service. the last major service that your car should get is 90,000 miles. at this service, your car should have all of the parts checked that it had at 60,000 miles. since the brakes are checked at every other service milestone, your mechanic should check them out if he or she didn't before when your car reached 60,000 miles. 2014 nissan quest coolant flush. a coolant flush or cooling system service consists of three prime services. adding a cleaner compound to get rid of particles, corrosion, sediment,and rust; replenishing the system with the appropriate coolant and meticulously measuring the dilution percentage; flushing the complete system thoroughly; how long.
Comments are closed.