Location Replacement And Function Of All 28 Coolant Hoses On The Porsche 996 997 Engine M96 M97

Location Replacement And Function Of All 28 Coolant Hoses Location replacement and function of all 28 coolant hoses on the porsche 911 996 997 engine m96 m97nathan's porsche workshoppo box 115 altenburg mo 63732nath. I've owned a lot of cars over the past several years, and the 911 carrera by far has the most radiator hoses of all of them.when porsche designed this car, t.

Porsche 997 Coolant Hose Diagram Is there a consolidated list of hoses and clamp part numbers and location description i.e; lower left water pump engine by year that a dyi guy could order from. maybe a kit that provides all 28 hoses or engine hoses and front radiator hoses. the schematic and no part numbers by year from porsche make this very frustrating. thank you. Open the bleeder valve that is next to the radiator cap. this is located under the plastic cover on top of the reservoir on the boxster and next to the cap on the 996. to open it lift up on the wire pull and rotate it 90 degrees so that it is in the upright position. begin filling the system with fresh porsche factory antifreeze to a 50 50 rate. I replaced all the coolant hoses on my 997.1 turbo cab (6 speed), except one. this hose (p n 997 106 477 72) is item #32 in the "m97.70 water pump housing diagram." i've removed the oil filter housing, the alternator, dropped the engine 3 4 inches. removing the hose at the water pump is easy, but at opposite end. Then, cut a slit in the lower radiator hose (996 only) and allow the coolant to empty out of the radiator and hoses (yellow arrow). figure 2 detach the air conditioning condenser from the front by removing the two bolts (green arrows) and sliding it out of its mounting tab (red arrow).