Kidde Hardwire Combination Carbon Monoxide And Photoelectric Smoke This does not necessarily mean the alarm is working. pressing the test button is the only recommended method. testing procedures: you can test your smoke alarm by pushing the test hush button on the cover and holding it down for a minimum of 5 seconds. this will sound the alarm if the electronic circuitry, horn and battery are working. Using the test button will ensure an accurate and complete test of your alarm (s) so you can feel confident that they are working properly. when testing interconnected units, be sure to verify all the alarms in the system go off. note: igniting combustible materials to test your alarm is not recommended. an accident could occur, resulting in a.
Kidde Kn Cope I Smoke Alarm Test Youtube The kidde kn cope i has some amazing features. it's a dual photoelectric smoke and carbon monoxide (co) alarm with a voice feature that tells you which emerg. Consistent chirping. if a smoke alarm is chirping consistently, one of the following may be the reason: the battery may need to be replaced. an alarm will chirp every 30 to 60 seconds for a minimum of seven days. with a "low battery" announcement, disconnect the unit and replace the batteries. you can also put a unit into low battery hush for. Kidde kn cope ic. user guide p n 2540 7201 04 en rev.a 01 21. for questions concerning your smoke and carbon monoxide. alarm, please call our consumer hotline at 1 800 880 6788. user guide for model kn cope ic. • 120 v ac (interconnectable) • 2 led display. • 9v battery backup. Note: test can only be initiated for smoke carbon monoxide alarms with smart features from the mobile application. for hardwire interconnect alarm test can be initiated only by pressing the button on device physically. once test is commenced, it cannot be stopped using hush button in the app or on the alarm.
Comments are closed.