Jaguar Xj8 Xk8 Xjr Cooling System Drain Flush

Jaguar Xj8 Xk8 Xjr Cooling System Drain Flush Youtube How to drain and flush the radiator and cooling system on jaguar 4.0 v8’s. works for both xj8 xjr x308’s aswell as xk8 xkr x100’s. forum regarding changing c. 15. release the cooling system pressure. • remove the coolant expansion tank pressure cap. 16. fill the cooling system up to the max mark on the coolant expansion tank using a fifty percent mixture of jaguar premium cooling system fluid or equivalent, meeting jaguar specification wss m97b44 d and fifty percent water. 17.

Jaguar Xk8 Cooling Fan Wiring Diagram Start your coolant flush by draining the coolant antifreeze that is in your reservoir, then drain the coolant that is in your radiator by opening the petcock or removing the lower radiator hose. this video shows where the radiator drain plug (petcock) is located on a 2008 jaguar xj8. fill up the radiator with distilled water and run the engine. The above all assumes a 50 50 coolant mix and 10 quart capacity. i don’t know if the above works with the xjr due to capacity differences, extra water pump, and the water cooled intercoolers. mike– the original message included these comments: i’d like to flush the cooling system on my xj8, but and not all that familiar with the v8 engine. Hands on xj8 experience to share. as far as i can tell, there is no special air bleeding procedure. for the system. note that the radiator has the plastic pipe from it. to the expansion tank to burp air from the radiator. and the other. plastic pipe running from the cylindrical capped ‘post’ up front. Intercooler plug sealing washer (jaguar, #jwv130001, $3.36) coolant pressure cap (jaguar, #mja4440ba, $17.67) tools needed: floor jack (preferred), or use jaguar scissor jack jackstands wheel chocks or wood blocks. fender protectors coolant drain pan (dish washing pan or similar) 7mm nut driver or socket.