Wire A Car Stereo Installation Guide Find and connect all loose wires (using an output converter, if needed). secure all your wires into place, using methods like soldering or twisting. test the stereo and install it into your car. secure the stereo with bolts or spring clips and reinstall the old trim. part 1. In this article, we'll show you how solder, tap, and crimp all the wires to ensure that your new stereo works right the first time. the first step to installing a new car stereo is connecting the stereo's wiring harness to the adapter that will plug into your car. making long lasting, secure wire connections is of the utmost importance.
How To Connect A Car Stereo System Sand down the area with sand paper to ensure a good connection. 5. connect the remaining wires. plug in the antenna cable and connect the stereo's wiring adapter to the the car's wire harness. connect the output converter if one is needed to make the new stereo compatible with the car's audio system. Car stereos are usually available in single or double din sizes. this simply refers to the size of the stereo chassis, and a single din stereo will be two inches tall by seven inches wide, while a double din stereo is four by seven inches. even if you have room for a double din, either option may require an adapter to fit the factory opening. Connect the stereo wiring adapter to the vehicle's wiring harness and plug in the antenna cable. depending on the stereo you choose, you’ll also need to connect various things to the rear of the stereo, such as the bluetooth® microphone wire, a usb cable, steering wheel control interface, or an auxiliary input cable. Just a quick video that explains what the wires on your aftermarket car stereo are and how they need to be installed🔻*introduction to car audio: car stereo.
Comments are closed.