How To Wax Your Car In 5 Easy Steps Kanata Mazda Step 4 flip the microfiber towel. during this step, flip over the towel to the clean side and continue to buff the product into the car until there are no traces of the product in the area it was applied. step 5 repeat the process. repeat this process along the remaining body of the vehicle. Just spray and wipe, even in full sun. image by by meguiars asia. to apply a spray wax thoroughly wash and dry your car. with a microfiber buffing towel in one hand and your spray wax in the other, spray and wipe a small area at a time. distribute evenly, then flip the towel to a dry side for a final buff.
How Does Polishing A Car Work At Allen Moncada Blog Why waxing your car is essential. how to wax a car. step 1: gather your car wax supplies. step 2: choose the right time and place to wax your vehicle. step 3: prep your car for a wax. step 4: apply the wax to the car. step 5: finishing touches after waxing your car. faqs on how to wax your vehicle. Step 2: apply liquid wax to an applicator pad. to start, grab a foam applicator pad and apply a few dots of product to the pad. you can apply paste wax with a da polisher, but liquid wax will be much easier to spread. avoid using a wool ‘cutting’ pad for applying wax. Use an overlapping circular motion when applying the wax, and cover an entire panel or section of a panel. repeat this process on all the car’s panels. the goal is to create a uniform layer of wax. once the whole car is covered in wax, allow the wax to dry to a haze. the curing process typically takes 10 to 15 minutes. 8. wash from top to bottom, one section of the car at a time: hose the area down, get it soapy, rinse it with the hose, rinse out the washcloth or mitt thoroughly with the hose before starting the next section. once you get the whole thing clean, rise the whole body down again with water. 9.
Comments are closed.