How To Rig A Mercury Verado Youtube Learn more about your boats systems by joining the born again boating academy! bornagainboating get your born again boating clothing! https:. 2023 mercury 250 4 stroke with dts. my current engine is a 2006 225 optimax with mechanical controls. i tried searching but was unable to find a list of what is needed for installation of the 4 stroke with dts controls. i have a new mercury dts panel mount control serial number 8m0133237 on order, but can’t find what harness cable is needed.
Mercury Verado 300 V8 I 300 Hour Full Outboard Service How To Diy At Note: mercury marine suggests routing the wiring, cables and fuel hose through a rigging hose or flexible sleeve from the engine to the boat's gunnel or motor well. follow the installation instructions included with the rigging hose or flexible sleeve kit. page 23: fuel hose connection 200 225 250 275 verado 4 stroke 1. 1 2” fuel line. battery cables (1 0) min rated to handle the new 150a alternator diode isolators acrs rated to 150a. • new excitation harness(s) must be ordered (rig center to isolator) low loss 14 pin data cables must be used – rig center to helm helm harnessing must be updated to next gen dts. Maintenance 5. to remove minor scratches, use mercury marine cowl finishing compound (92 859026k 1). cleaning care for the powerhead (saltwater use) if the outboard is operated in saltwater, remove the top cowl and flywheel cover. inspect the powerhead and powerhead components for salt build up. Mercury says the v 10 has been tested at more than 90 mph. the 2.08 to 1 ratio amplifies torque to four blade revolution x props that offer 35 to 50 percent more blade area than props for the 2.6 liter verado 400 model, according to merc. blade area provides the thrust to push heavy boats on plane with authority and hold them there at lower.
Comments are closed.