How To Recharge Ac System With Gauges Properly And Evacuate Youtube

How To Recharge Ac System With Gauges Properly And Evacuate Youtube How to recharge ac system properly and evacuate. the vehicle in this video is a honda civic. the air conditioning is very similar on most cars. the differe. Recharge your ac system properly. i go though all of the steps on how to safely charge your air conditioning system with refrigerant. first you need to evacu.

How To Recharge A Car S A C System Using A Manifold Gauge Set Vacuum Today we are showing you exactly how to vacuum down and recharge an air conditioning system. this is a comprehensive video that will teach you precisely how. Follow these key steps to use manifold gauges like the orion motor tech set to recharge your car's ac system: attach the gauge set hoses to the ac ports connect the red hose to the high pressure port and the blue hose to the low pressure port. consult your vehicle repair manual for the exact port locations. check the pressure readings with ac. Place the refrigerant liquid into the open valve on the low side of the manifold gauge. make sure that the high side valve is not open. you may need to repeat the process sup to three times to fill the entire a c system. this will depend on the system requirements and it will help if you check the manual. the entire process of evacuating and. If you’re pulling a vacuum on the evaporator and line set, a one hose setup will suffice. however, a two hose setup is ideal if you’re pulling a vacuum on the entire system. after you remove the core from the side you’re pulling the vacuum from, remove the end of the tool and connect the hose. connect the hose back to the vacuum pump and.

How To Properly Recharge Your Ac System Youtube Place the refrigerant liquid into the open valve on the low side of the manifold gauge. make sure that the high side valve is not open. you may need to repeat the process sup to three times to fill the entire a c system. this will depend on the system requirements and it will help if you check the manual. the entire process of evacuating and. If you’re pulling a vacuum on the evaporator and line set, a one hose setup will suffice. however, a two hose setup is ideal if you’re pulling a vacuum on the entire system. after you remove the core from the side you’re pulling the vacuum from, remove the end of the tool and connect the hose. connect the hose back to the vacuum pump and. Next, screw the gauge onto the can. reconnect the quick connect coupler to the low side ports, and now we can begin the recharge process. when performing a recharge, always be sure to hold the can upright in the 12:00 position when not shaking the can. ac pro’s easy to use trigger style gauge design makes recharging simple. July 7, 2018. in this video, we demonstrate how to evacuate an air conditioning system with a fast and deep vacuum. as usual, we cover some of the best evacuation practices along the way. bryan uses the bluvac app to display data throughout the evacuation process. evacuation refers to when we pull the inside of the a c circuit into a vacuum.