How To Put Fabric On Af1 S The Correct Way Tutorial Youtube How to lace your af1s, this is by far my personal favourite way to lace the classic af1, with a loose fit it allows you to bring together comfort along with. Learning how to lace your air force 1s in a standard style is key to keeping your sneakers looking good, if you are replacing the laces or have taken the lac.
How To Put Fabric On Af1 S The Right Way Tutorial Youtube Push each end of the shoelace through the bottom eyelets. press the left side of the shoelace down through the top of the bottom left eyelet. then, press the right side of the lace through the top of the bottom right eyelet. center the metal tag across the tongue and make sure the laces are straight, not twisted. 1. unlace your shoes and remove the outer finish with acetone. pour a little bit of acetone onto a cotton ball and rub down the outside of the shoe—specifically, the sections you plan on customizing. the acetone strips the factory finish from the af1s, which makes it easier for the glue to bond. Thread laces through the air force 1 tag at the bottom, so laces are on the underside of the holes. take the right lace and thread it through the underside of the second right hole. with your left lace, thread it into the underside of the third left hole. go back to your right lace, bringing it across the shoe’s throat and down through the hole. Method. cover the parts of your shoes you don’t want any paint over (like the soles) with tape. after this, draw or stencil out your design using either tape (covering in tape and then gradually removing parts you want to paint) or graphite paper. take your colors and apply thin, even coats of your paints on your shoe.
Comments are closed.