Geothermal Energy And Water Use Pdf Australian geothermal energy conference 2011 63 geothermal water use: requirements and potential effects ¹driscoll, j.p.*& ²middlemis, h. jim.driscoll@hotdryrocks ¹hot dry rocks pty ltd, 36 garden street, south yarra, vic 3141 ²rps aquaterra, level 6, 33 franklin street, adelaide, sa 5000 geothermal projects require access to water. The geopressured results are allocated according to geothermal electric power generation (3.6 mw) and natural gas thermal power generation (17.4 mw) because both are produced from the system. this allocation results in water consumption of 4e 04 – 5e 04 gal per kwh lifetime energy output for the geothermal system.
Pdf Geothermal Water Use Requirements And Potential Effects Geothermal energy is energy created by the heat of the earth. to extract energy from the underground, water is most times used as the heat carrier. as the crust is highly fractured and thus. The forth scenario is based upon nems model results presented in the eia’s 2012 annual energy outlook that show growth in geothermal electricity production of 3.9. gw by 2035 (eia 2012). in addition to estimating water demand, an attempt was made to quantify the availability of water at the same huc 4 resolution. 3.1.3.1 well construction. the drilling phase of the geothermal power plant life cycle requires the use of drill rigs, fuel, and materials including the casing, cement, liners, mud constituents, and water. water is used during the well construction figure 3 1 system boundary for well. Geothermal energy is heat derived within the sub surface of the earth. water and or steam carry the geothermal energy to the earth’s surface. depending on its characteristics, the geothermal energy can be used for heating and cooling purposes or can be harnessed to generate clean electricity.
Comments are closed.