Doing Mandatory Maintenance On My E46 Drift Wagon Bmw Cooling System I wanted to get this done before a major failure occurred in the winter. i did not want to have to deal with an overheating car in this cold!wifi obd 2 scann. Since adding coolant, i've noticed several issues: temp gauge is 1 2mm to the right of tdc once the car warms up (see dash pic) on my most recent trip, the coolant temp range was 94 96c. a grinding noise at idle with the hood up that sounds like its coming from the water pump water pump pulley (see video).
Bmw E46 Coolant System Maintenance Youtube Part# 11287512762 (4 rib from 9 02) $7.91. expansion tank mounting plate (optional) part# 17111436250. rmeuropean genuine bmw $54.53. automatic cars: (if you drive an auto trans., add the following parts to the above list) expansion tank mounting plate (optional) part# 17111436251. rmeuropean genuine bmw $54.53. Excessive belt noise. grinding or metallic noise from pulleys. since there are so many ways for the e46 cooling system to go wrong, there are quite a few associated symptoms. the symptoms that encompass most e46 cooling system problems include elevated engine temps, severe coolant leaks, and a loud cooling fan. Bmw e46 expansion tank cracking. one of the primary areas of issue for the bmw e46 cooling system is the expansion tank. this is actually a very common issue on most bmw’s up until the late 2010s due to the material used for the tank itself. both the bmw m52tu and m54 used a plastic expansion tank that had thin walls and was prone to damage. As a preventative measure, e46 owners should attempt to replace certain parts on a regular basis. the typical service interval for a cooling overhaul falls in the 75,000 90,000 mile range. if you have the ability to do the work yourself, you can save yourself money by just buying the parts and doing the work yourself.
Bmw E46 Cooling System Overhaul Youtube Bmw e46 expansion tank cracking. one of the primary areas of issue for the bmw e46 cooling system is the expansion tank. this is actually a very common issue on most bmw’s up until the late 2010s due to the material used for the tank itself. both the bmw m52tu and m54 used a plastic expansion tank that had thin walls and was prone to damage. As a preventative measure, e46 owners should attempt to replace certain parts on a regular basis. the typical service interval for a cooling overhaul falls in the 75,000 90,000 mile range. if you have the ability to do the work yourself, you can save yourself money by just buying the parts and doing the work yourself. Part# 11287512762 (4 rib from 9 02) $7.91. expansion tank mounting plate (optional) part# 17111436250. rmeuropean genuine bmw $54.53. automatic cars: (if you drive an auto trans., add the following parts to the above list) expansion tank mounting plate (optional) part# 17111436251. rmeuropean genuine bmw $54.53. At around two decades old, the rubber and plastic cooling system components in your m54 powered e46 3 series are likely on their last legs, assuming they ha.
Comments are closed.