Diy Hooded Towels For Kids Love Renovations Measure 11.5″ down from the folded edge and cut off the bottom edges. 3. open the hand towel and fold 1.5″ up on one long side. use your coordinating thread to sew a straight stitch right below the finished edge along your fold. 4. then go back and sew right on top of the finished edge. Fold the bath towel in half crosswise to meet the short edges. mark the middle with a pin and unfold the towel. place it on a flat surface and layer the hood on top with right sides together. the inside of the hood should be facing you. match the center neck seam of the hood with the top edge of the batch towel. pin.
Diy Hooded Bath Towel Instructions. start out by cutting your hand towel in half across the short size so that it ends up short and fat. then, with the finished edge fold it under about 4 inches or so: and sew that in place: you can decide which side you want to have on the outside of your hood and which you want inside. Instructions. assemble all the materials and tools needed. cut the hand towel in half. if only one side has ribbing, save that piece for continuing to make your hood. to make the hood: fold up the bottom edge of the hand towel until the ribbing is at the edge of the fold. pin in place along the upper edge. Lay the hood on top of the bath towel, overlapping by about 1". pin the hood onto the bath towel. stitch the bottom edge of the hood finished seams with 1 4" seam allowance on the left edge of the seams. flip the towel over and pin the bath towel flap to the hood. stitch along the edge to reinforce the seam. Using a zig zag stitch, sew the cut edges together. then turn the hood right side out so that the zig zag seam you just sewed is on the inside; make sure to turn it inside out all the way up to the corner point of the hood. then lay the hood out flat so that the factory finished edge of the towel is at the bottom and the seam you just sewed is.
Make Hooded Towel Tutorial Diy Hooded Towel Tutorial Hooded T Lay the hood on top of the bath towel, overlapping by about 1". pin the hood onto the bath towel. stitch the bottom edge of the hood finished seams with 1 4" seam allowance on the left edge of the seams. flip the towel over and pin the bath towel flap to the hood. stitch along the edge to reinforce the seam. Using a zig zag stitch, sew the cut edges together. then turn the hood right side out so that the zig zag seam you just sewed is on the inside; make sure to turn it inside out all the way up to the corner point of the hood. then lay the hood out flat so that the factory finished edge of the towel is at the bottom and the seam you just sewed is. Then you pin the opposite edge of the hood with the right side on the inside. and you sew that edge (just a regular stitch this time). the hood portion is now complete. fold the bath towel in half and mark the centre, then pin the hood to the bath towel as shown below. sew the hood to the towel. Fold the large towel in half to find the middle. place the hood there and pin it, making sure that you don’t pin the whole thing together. like so you can’t open it up to sew it. now working with the outside of the towel and hood up, feed it through your sewing machine doing a zig zag stitch along the outer seam of the large bath towel.
Comments are closed.