Cooling System Leak And Pressure Testing

Cooling System Leak And Pressure Testing Youtube A coolant pressure test helps identify any leaks or blockages in the cooling system, which can prevent overheating and engine damage. a coolant pressure test can help identify problems with the radiator, water pump, thermostat, and hoses. a coolant pressure test can help extend the life of the cooling system by detecting and addressing any. A radiator or cooling system pressure test is useful when finding a radiator leak or a blown head gasket.this tool attaches to the top or the radiator or coolant reservoir and enables air pressure to be pumped into the system including the engine block, cylinder heads, coolant hoses, heater core and radiator.

Testing A Cooling System For Leaks Using A Pressure Tester Youtube Tighten the coolant pressure tester to the adapter or the radiator or coolant reservoir. push down and twist the connector clockwise until you feel it click and it locks in place. check the radiator cap for the system’s psi. check the radiator cap to see how much pressure to apply without going over this number. In the first instance, pressurising the system will determine if there is a leak or not. the tester comprises a gauge which measures the pressure in the system. if the reading on the gauge doesn’t drop within 10 minutes or so, there's no leak in the circuit, but if the reading falls an external leak can be identified by a fine spray or. Check the pressure reading on the gauge immediately after reaching the vehicle manufacturer’s recommended pressure. if the pressure reading drops, there is a leak in the cooling system. after pressure testing is completed, press the release button on the quick coupler until the reading on the gauge reads 0. remove quick coupler from radiator. Engine cooling system leaks are a common concern for the vehicle owner and technician. this video covers the procedure for conducting a cooling system pressu.