Arduino Radar Sonar Using Arduino Processing Full Tutorial

Arduino Radar Sonar Using Arduino Processing Full Tutorial Youtube Mish mash labs present our take on the arduino based radar project.we used the arduino uno, the sg90 servo and the hc sr04 ultrasonic sensor.0:00 intro0:35 p. Building the device. first i made a cardboard stand for connecting the ultrasonic sensor to the servo motor. i folded it like it’s shown on the picture below, glued it and secured to the servo motor using a screw like this. also i attached a pin header on which i soldered 4 jumper wires for connecting the sensor.

Ultrasonic Radar With Arduino Arduino Project Hub 63 angle the arduino board sent into the serial port 64 distance = data.substring( index1 1, 65 data.length()); read the data from position "index1" to the end of the data 66 pr thats the value of the distance. 67 68 converts the string variables into 69 integer 70 iangle = int( angle); 71 idistance = int( distance); 72 } 73 void. We will be using the processing ide and a java file that communicates with the arduino to display the radar output graphically. running the radar. with everything set up and connected, we can now run the radar system. we will power on the arduino, start the processing ide, and run the java file to display the radar output. troubleshooting and tips. This simple project will use the hc sr04 sensor with an arduino and a processing sketch to provide a neat little interactive display on your computer screen. servo : a servomotor is a rotary actuator or linear actuator that allows for precise control of angular or linear position, velocity and acceleration. The programming is done in the arduino ide and the radar is displayed using the processing ide. in simple words this is how the project works. the ultrasonic sensor is mounted on a servo motor which rotates sideways. the sensor scans he area within it's distance (around 200cm far). if there is no object in a specified range let's say that there.