1994 2001 Dodge Ram 1500 Coolant Temperature Gauge And Sender Youtube

1994 2001 Dodge Ram 1500 Coolant Temperature Gauge And Sender Youtube 1994 2001 dodge ram 1500. the temperature gauge in the instrument cluster was not operating. i replace the coolant temperature sender and i repaired the temp. This article applies to the dodge ram 2nd generation (1994 2001). the coolant temp sensor(s) have a few jobs. they send a signal to the gauges so you can monitor engine temperature, they tell the radiator fans when to kick on or off, and they let the ecu know how warm the engine is so that it can fine tune the fuel delivery to give you maximum performance as well as fuel efficiency.

Dodge Ram 1994 2001 How To Replace Engine Coolant Temperature Se How to test coolant temperature sensor. any carin this video we will demonstrate how to test coolant temperature sensor on any car. all you are going to need. In this video, you will learn 5 symptoms of a bad or failing engine coolant temperature sensor (ect sensor). watching this video will help you diagnose to se. The readings are from the gauge in the block, 2.13 dead cold. with the engine at idle after start up for 2 3mins reading 0.12 after a 25 minute drive reading at 0.03 and then after standing for a few minutes to cool down after the drive i took a further reading at 0.05 so the readings suggest the sensor is working and my coolant is heating up just nothing from the gauge. The cts (coolant temperature sensor) should be at the front of the motor near the thermostat. in this pic of mine, the cts is on the furtherest right, near the radiator hose, and the oil fill cap. o.o., 01.5, 2500, h.o. (245 505), 6 speed nv5600, 3.55's, 4x4, qclb, sport, 131k, currently stock engine with a 170 p pump, crazy carl conversion.

Dodge Ram 1500 Temperature Sensor Location Truck Guider The readings are from the gauge in the block, 2.13 dead cold. with the engine at idle after start up for 2 3mins reading 0.12 after a 25 minute drive reading at 0.03 and then after standing for a few minutes to cool down after the drive i took a further reading at 0.05 so the readings suggest the sensor is working and my coolant is heating up just nothing from the gauge. The cts (coolant temperature sensor) should be at the front of the motor near the thermostat. in this pic of mine, the cts is on the furtherest right, near the radiator hose, and the oil fill cap. o.o., 01.5, 2500, h.o. (245 505), 6 speed nv5600, 3.55's, 4x4, qclb, sport, 131k, currently stock engine with a 170 p pump, crazy carl conversion. The cam sensor sometimes will cause a no start. i wouldn't think a temp sensor would. yes it can.if it's 70* ambient and the sensor is open circuit it will think it's something like 38* and give it way too much fuel.or if the sensors shorted and it's 20* it won't give it enough fuel to start, jan 15, 2020. #5. Gloves. 1. with the engine and coolant entirely cooled down, disconnect the battery. this is recommended for any electrical procedure. 2. remove any plastic engine covers. depending on the engine, you may have to remove part of the plastic air intake tubing. 3. locate the coolant temp sensor.

Dodge Ram 1994 2001 2nd Generation How To Replace Engine Coolant The cam sensor sometimes will cause a no start. i wouldn't think a temp sensor would. yes it can.if it's 70* ambient and the sensor is open circuit it will think it's something like 38* and give it way too much fuel.or if the sensors shorted and it's 20* it won't give it enough fuel to start, jan 15, 2020. #5. Gloves. 1. with the engine and coolant entirely cooled down, disconnect the battery. this is recommended for any electrical procedure. 2. remove any plastic engine covers. depending on the engine, you may have to remove part of the plastic air intake tubing. 3. locate the coolant temp sensor.

Engine Colant Tempeture Sensor Or Ect Replacement 2001 Dodge Ram Youtube